TPU Hot Melt Adhesive Film

TPU adhesive film for textile lamination, footwear materials, PU leather, electronic covers, labels and flexible bonding structures. It is used when buyers need clean dry-film bonding, soft hand feel, flexibility and sample-based grade selection.

Flexible TPU bonding for soft and bendable products.
Roll, slit roll, sheet and die-cut supply options.
Release paper, release film or liner-free handling by grade.

Material	TPU / Modified TPU
Thickness	0.025-0.30 mm reference options
Width	24 inch / 54 inch reference; custom slitting available
Appearance	Transparent / Translucent
Liner	Release paper / release film / liner-free by grade
Supply Form	Roll / slit roll / sheet / die-cut piece
Application	Apparel & textiles, footwear & bags, leather goods, electronic covers, labels & die-cut parts
Sample Grade Direction	ZF-1682 / ZF-5180 / ZF-7325 / ZF-8026 / ZF-7608 / ZF-6235 / ZF-6238 / ZF-4200 / ZF-8815

Request a Sample

Get a Quote

Product Categories

TPU adhesive film is a flexible thermoplastic polyurethane (TPU) bonding film for factories that need clean lamination without liquid glue. It is commonly selected for soft textile structures, footwear materials, leather goods, labels, electronic covers and other products that need flexibility or repeated bending.

Product Fit

Choose TPU when the finished product needs flexibility, soft hand feel or bending resistance.
Use sample testing to select low-temperature, stronger bonding, softer hand-feel or higher-temperature TPU directions.
Compare PES, PA, EVA or PO when heat resistance, washing, cost, or plastic bonding requirements point to another material family.

Recommended Applications

Application Area	Typical Product / Bonding Position	What To Confirm
Apparel and textile lamination	Seamless edges, sportswear details, fabric layers, labels and trims	Hand feel, stretch recovery, strike-through, washing need and peel strength.
Footwear and bag materials	Shoe upper details, lining lamination, TPU mesh, bag reinforcement parts	Flexing, surface marks, heat aging and peel strength after repeated use.
Leather goods and electronic covers	PU leather cases, tablet keyboard covers, protective covers, microfiber lining	Edge lift, folding resistance, coating tolerance and appearance after cooling.
Labels, logos and die-cut parts	Clothing labels, logo patches, decorative trims, local reinforcement pieces	Cutting accuracy, liner release, edge bonding and final appearance.
Flexible straps and composite parts	Strap structures, pad laminates, flexible support layers and custom die-cut pieces; for brace-strap laminates, see the medical support braces and straps film matching direction.	Flex durability, bonding uniformity, aging test and any end-use compliance requirement.

Suitable Bonding Materials

Common trial materials include polyester, nylon, cotton blends, Lycra/spandex structures, nonwoven fabric, PU leather, microfiber leather, TPU film, mesh, ABS, PC, PET fiberglass board and selected coated materials. Difficult coatings, oily surfaces, plasticized materials and low-energy surfaces should be tested before bulk order.

Selection Notes Before Sampling

Selection Point	What To Check Before Sampling
Substrate and surface	Confirm fabric type, PU or microfiber coating, mesh structure, plastic support layer and surface treatment before grade selection.
Flexibility and hand feel	For garments, footwear and flexible parts, test softness, bending, stretch recovery and glue-line feel after cooling.
Processing window	Choose the grade by bonding temperature, pressure, dwell time, heat tolerance and whether the surface is easy to mark or deform.
Liner and converting	Release paper, release film or liner-free handling should be confirmed by slitting, die cutting, positioning and lamination process.
Final verification	Check peel strength, edge lift, washing, flexing, heat aging or other end-use tests before bulk order.

Sample Grade Selection

The table lists the current VELNORA TPU grades, grouped by melting point. Start with the lowest-temperature grade your substrates and end use allow, then confirm with your own bonding test. Values are line-card references, not a final guarantee for every substrate.

Public Code	Material	Melting Point	Shore Hardness	Starting Service Conditions	Sample Direction
Low-temperature grades (65-80 C melting point)
ZF-1682	Modified TPU	65 C	60A	90-110 C, 0.1-0.4 MPa, 5-12 s	Special metal surfaces and low-surface-energy substrates; metal sheet, electronic cases, textiles and cosmetic boxes.
ZF-5180	TPU	75-80 C	90A	80-110 C, 0.1-0.4 MPa, 5-20 s	Lower-temperature direction for PU leather, microfiber, ABS, PC, TPU and textile bonding.
ZF-7325	TPU	75-80 C	90A	110-130 C, 0.1-0.4 MPa, 5-20 s	Electronic leather cases and textile bonding at a lower melting point.
Medium-temperature grades (80-100 C melting point)
ZF-8026	TPU	80-85 C	80A	120-140 C, 0.1-0.4 MPa, 10-20 s	Leather, PU, microfiber, PC/ABS support sheets, TPU and medical strap trial direction.
ZF-7608	TPU	85 C	80A	110-130 C, 0.1-0.4 MPa, 10-20 s	Lycra and cotton fabrics; audio wrapping and electronic protective covers.
ZF-6235	TPU	95-100 C	65A	160-200 C, 0.1-0.4 MPa, 10-20 s	Waterproof zipper, clothing label and fabric bonding direction.
ZF-6238	TPU	95-100 C	80A	120-140 C, 0.1-0.4 MPa, 5-20 s	Electronic leather cases and textile bonding.
ZF-4200	TPU + resin	100 C	70A	120-150 C, 0.1-0.4 MPa, 5-15 s	Electronic leather cases and plastic-to-metal bonding trials.
High-temperature grade (120-130 C melting point)
ZF-8815	TPU	120-130 C	65A	140-180 C, 0.1-0.4 MPa, 8-20 s	Shoe material surface, TPU mesh bonding and shaping direction.

Processing and Sample Support

Start from the lowest effective temperature for the selected grade, keep pressure even, and test peel strength after cooling. For samples, send material names, photos, target thickness, width, machine type, temperature limit and final test standard. For starting settings by TPU grade and how to adjust them for your substrate, see how to set temperature, pressure and time for hot melt adhesive film.

Samples, MOQ and Lead Time

Samples: Sample sheets of standard grades are available for bonding tests. Tell us your substrates, equipment and target process, and we will suggest which ZF grades to test first.
MOQ: From 1 roll for standard grades. For custom thickness, width or liner, the MOQ is confirmed with the quotation.
Lead time: Standard grades are typically ready to ship 7-15 days after order confirmation. For custom specifications, the lead time is confirmed with the quotation.
Roll format: Supplied on release paper in 54 in (approx. 1370 mm) wide rolls, with 24 in for selected grades such as ZF-4200. Slit rolls, sheets and die-cut pieces are available on request. Rolls are wrapped and cartoned for export.

Quality Control Summary

Typical checks include thickness, width, roll appearance, liner release, melt behavior, sample bonding, peel strength and packing condition.

VELNORA certified manufacturing capability and quality system certificates — Certified manufacturing capability and documented quality-process support for B2B adhesive film projects.

FAQ

What is TPU hot melt adhesive film used for?

It is used for textile lamination, footwear materials, leather goods, labels, electronic covers and flexible composite structures.

Can TPU film be supplied with release paper?

Yes. Release paper is common, and release film or liner-free supply can also be reviewed by grade and process.

How do I choose the right TPU grade?

Choose by substrate, thickness, liner, bonding temperature, pressure, dwell time, flexibility target and final test requirement.

Can TPU film be customized?

Thickness, width, supply form, liner and sample grade direction can be discussed according to the application.

What information is needed for quotation?

Send substrate, application, target thickness, width, liner requirement, order quantity and bonding conditions.

Related Products

Request Samples

Send your material, application, thickness, working temperature and estimated quantity. VELNORA can recommend a TPU hot melt adhesive film sample for testing.

Related Applications and Selection Guides

For sample testing or quotation support, send your substrate, thickness, width, release paper requirement and estimated quantity through Request a Quote.

Why Choose TPU Adhesive Film?

Buyers usually choose TPU adhesive film when the bonded part needs a soft hand feel, repeated bending, elastic recovery or flexible lamination. As a thermoplastic polyurethane adhesive film, it is commonly reviewed for textile layers, footwear components, PU leather, coated fabric and other flexible laminates where the bond line should move with the substrate.

Compared with PES, PA, EVA or PO directions, TPU is normally considered first for flexible structures rather than rigid board, paper packaging or lower-polarity PP/PE parts. If the project needs higher textile heat resistance, leather-focused durability, foam and paper economy, or polyolefin substrate compatibility, another polymer family may be a better starting point.

Request a Sample

Get a Quote

Certified Quality Systems & Test Reports

VELNORA operates under ISO 9001 quality management and ISO 14001 environmental management systems. Third-party test reports for REACH, RoHS / halogen, California Proposition 65, VOC, organotin and phthalates are available for buyer review on request.

ISO 9001 & ISO 14001 certified. REACH, RoHS, Prop 65, VOC and other test reports on request.