Close-up of embroidery patch backing for PES hot melt adhesive film application

PES hot melt adhesive film roll with embroidered patches for garment badge backing

PES Hot Melt Adhesive Film for Embroidery Patches

PES adhesive film for embroidery patches is a thermoplastic polyester bonding film for embroidered badges, woven labels, trademark labels and garment patch backing. It supports stable patch shape, clean die cutting and heat-press backing direction for patch and label converters.

Material	PES / Copolyester hot melt adhesive film
Thickness	0.025-0.30 mm
Width	54 inch reference; custom slitting available
Appearance	Transparent / Translucent
Liner	Release paper
Supply Form	Roll / slit roll / sheet / die-cut piece
Application	Embroidery patches, garment badges, trademark labels
Sample Grade Direction	ZF-8816

Request a Sample

Get a Quote

Product Categories

Product Fit

This PES hot melt adhesive film is designed for embroidery patch backing and garment badge production. It helps factories prepare heat-activated patch backs for uniforms, casual garments, hats, bags and decorative textile products.

The recommended public sample direction is ZF-8816. Final approval should be based on the real patch fabric, embroidery density, garment material, press equipment and buyer wash or peel test.

Key Features

Copolyester hot melt film for structured textile and label bonding.
Good dimensional stability for embroidered patches and trademark label backing.
Suitable for release-paper handling, die cutting, slitting and sheet conversion.
Higher activation temperature than many EVA options, useful when heat resistance and shape stability matter.

Recommended Applications

Application Area	Typical Product / Bonding Position	What To Confirm
Embroidery patch backing	Back side of embroidered badges before heat pressing	Embroidery density, adhesive coverage, edge lifting and wash result.
Garment badges	Uniform patches, logo patches and decorative garment emblems	Garment heat tolerance, hand feel and appearance after cooling.
Trademark labels	Woven or embroidered label backing	Label thickness, edge fray, press marks and positioning accuracy.
Heat-press patch assembly	Patches for garments, hats and bags	Press temperature, pressure, dwell time, cooling and peel check.

Suitable Bonding Materials

Common trial materials include embroidered fabric, polyester fabric, cotton fabric, Lycra, woven labels, nonwoven backing and selected garment fabrics. Coated, dyed, elastic or heat-sensitive fabrics should be tested before bulk order.

Selection Notes Before Sampling

Selection Item	Practical Checkpoint
Patch structure	Confirm embroidery density, backing fabric, thread type and edge thickness.
Garment fabric	Check polyester, cotton, Lycra or blended fabric heat tolerance and color migration risk.
Liner / converting	Release paper is the common handling option; sheet, slit roll and die-cut supply can be discussed.
Final test	Review peel strength, wash result, edge lift, hand feel and appearance after cooling.

Technical Parameters

Item	ZF-8816 Reference
Material family	PES / copolyester hot melt adhesive film
Appearance	Transparent or translucent film
Thickness options	0.025 / 0.05 / 0.075 / 0.10 / 0.15 / 0.20 / 0.30 mm
Liner	Release paper
Width	54 inch reference; custom slitting available
Melting point	110-120 C
Shore hardness	90A
Storage	Keep sealed in a cool, ventilated place, around -20 C to 45 C / 10%-95% RH.

Basic Processing Guide

For ZF-8816 sample testing, the line-card reference condition is 0.1-0.4 MPa, 140-160 C, 10-15 seconds. Use this as a starting point only. The real interface temperature can differ from the heat press display, especially with thick embroidery, dense backing or multilayer fabric.

Customization and Sample Support

Roll width, slit width, sheet size, die-cut piece size and liner handling can be reviewed according to your patch production process. For sample matching, send the patch photo, back fabric, garment fabric, target thickness, heat press setting and required wash or peel test.

Quality Control Summary

For embroidery patch orders, check film thickness, roll appearance, release paper condition, blocking, die-cut cleanliness, bonding appearance, edge lift and peel result after cooling. Bulk production should follow the approved sample parameters.

FAQ

Is PES hot melt adhesive film suitable for embroidered patches?

Yes. PES film is a good option when the patch needs stable shape, clean backing and heat-press bonding after sample approval.

Can this film be used for woven labels or trademark labels?

It can be tested for woven labels, embroidered labels and trademark label backing. The label thickness, edge structure and garment fabric should be confirmed first.

What processing direction should I review first?

For ZF-8816, start from 0.1-0.4 MPa, 140-160 C and 10-15 seconds, then adjust according to patch density, substrate thickness and final test result.

What information should I send for samples?

Please send the patch material, backing fabric, garment fabric, thickness target, press machine type, expected wash test and current bonding problem if any.

Related Products

Sample and Inquiry Guidance

For a faster recommendation, share your embroidery patch structure, garment fabric, bonding equipment and target testing method. VELNORA can review whether ZF-8816 is the right starting sample or whether another film family should be tested.

Request a Sample

Get a Quote

Certified Quality Systems & Test Reports

VELNORA operates under ISO 9001 quality management and ISO 14001 environmental management systems. Third-party test reports for REACH, RoHS / halogen, California Proposition 65, VOC, organotin and phthalates are available for buyer review on request.

ISO 9001 & ISO 14001 certified. REACH, RoHS, Prop 65, VOC and other test reports on request.